Brembo OEM Replacement Brake Rotors are direct replacements for your vehicle. Choose the best with Brembo and relax with the confidence in the worlds highest quality Brake Rotor.
All Brembo OEM Replacement Brake Rotors are manufactured under QS-9000 and ISO 9001 certifications to assure the at level of quality in all products.
NEW EASY CHECK DISC – SAFETY AT FIRST SIGHT
Brembo has developed Easy Check, the brake disc that unites OEM matching quality with an exclusive system that proves the state of wear, due to two holes of different depths: one by the Minimum Thickness, the other a few tenths of a millimeter before the Minimum Thickness.
- 2 Marks: OK.
Brake disc wear falls within the safety limits allowed.
- 1 Mark: Check!
The brake disc has worn down over 80% of its wearable thickness, therefore its volume of cast iron is proportionally reduced and the disc tends to reach higher operating temperatures. Check that its condition of use is normal, i.e. that there are no cracks, dark marks or deep scratches on the surface. Replace it within the next 5/10,000 km.
- 0 Mark: Replace!!
The disc has worn down all its wearable thickness, reaching or exceeding the minimum thickness marked on the disc (MIN TH). Replace it immediately so as not to affect the safety of the vehicle.
A special label on the pack and the final number “4” instead of “0” easily identifies the Easy Check product range.
ALL BREMBO OEM ROTORS ARE SOLD ‘PER ROTOR’ NOT AS MATCHED SETS